Group · Seal · Shrink / Linear PE film wrapping

Automatic Linear Shrink Wrapping Machine

Automatic bottle grouping, PE film sealing and heat shrinking in a straight-line system. Rated at 15–20 packs per minute, with Schneider PLC and touchscreen controls.

PE film
15–20 packs/min
Schneider controls

Request a proposal Compare specifications

Automatic Linear Shrink Wrapping Machine

Published technical data

Compare the configuration.

Specifications are from the published product record. Confirm the selected model, output and utilities for your project.

Technical specifications

Parameter	Specification
Model	PM-HW20
Packing speed	15–20 packs/min
Power supply	380 V, 50–60 Hz, three-phase five-wire
Installed power	30 kW
Compressed-air pressure	0.7–0.9 MPa
Air consumption	100 NL/min
Overall dimensions (L × W × H)	13,800 × 1,400 × 2,100 mm
Shrink chamber (L × W × H)	2,400 × 650 × 450 mm
Sealing and cutting temperature	180–220 °C
Shrink temperature	200–220 °C
Film material	PE
Maximum film-roll width	580 mm
Film thickness	0.06–0.12 mm
Maximum film-roll diameter	400 mm
Machine weight	2,500 kg
PLC and HMI	Schneider

Equipment details

Inside the linear wrapper.

Bottle grouping, PE film sealing, heat shrinking and cooling in one straight-line process.

Flexible pack formats

Store settings for different bottle types and pack arrangements.

Controlled heating

Set sealing and tunnel temperatures to suit the wrapping process.

Schneider controls

PLC and touchscreen operation with photoelectric bottle detection.

01 / Component

Bottle dividing

Guides incoming containers into lanes and groups them for wrapping.

02 / Component

Photoelectric detection

Detects bottles and sends signals to the PLC to coordinate the packaging sequence.

03 / Component

Pressing and film cutting

Holds the bottle group in position while the heated cutter seals and cuts the film.

04 / Component

Touchscreen controls

Schneider PLC and HMI controls manage machine operation and packaging settings.

05 / Component

Shrink tunnel

Multiple temperature sensing points control heat as the wrapped packs pass through the tunnel.

06 / Component

Cooling fans

Cool and set the film around the finished packs before discharge.

Equipment layout

Plan the line footprint.

Side and plan views of the infeed, wrapping machine and shrink tunnel.

Plan your line

Tell us what you need to produce.

Share your product, container, target output and available utilities. We can recommend the right machine and integration route.

Request a proposal